To come up with an original idea and implement it, one needs to invest resources. For instance, the legendary William Vedult spent a lot of time designing photography paintings before the camera took over. His works have not gone into waste since painters still refer back to his projects when creating
Art Verdult Sculpture Paintings Photography Realism Cubism pieces.
Come in with a sketch on what you want to add in that paint. You can use realism photography or use imaginations on what the project will entail. The images could be downloaded from the internet or sketched using a free hand. The sketch will include such things as the brightness of the colors.
After the draft is ready, the painter should light the working area well. Since the ratio of ink has already been applied, the painter should now immerse the painting brushes lightly on the color and shake well. This ensures only a tiny amount of ink remains in the brushes. The edges of the brushes are then passed lightly against the canvas to follow the pattern. The ink should apply in such a way that a small amount of it remains on the drawing paper.
Light the working area and make sure it is free from dust and other dirt that might interfere with the drawing. Get your combination of ink ready and scribble the color that will appear on the carving. Immerse the brushes in the paint and use them to paint on the canvas. However, do not put more paint on your canvas since it might be hard to remove in case extra ink flows past where it is supposed to be.
Carefully remove the canvas until the carving is left bare. The uncovered wooden sculpture will have attained a realism approach. Let it settle for about another 30 minutes until the ink is absorbed in the body. Tilt it to a position where enough air can dry it. If the sculpture is left standing, more reinforcement should be used to prevent it from falling over.
Use brushes to apply ink on the wooden statue. Apply small ink at a time until the wood is completely covered with the ink. Use a piece of cloth to remove any color that might move away from the designated area. Use concentrated ink to give the artifact a more colorful image.
Put the painting in a dry place away from direct sunlight. This will allow it to dry at the right rate without fading from the excess heat, which might melt the ink applied to the sculpture. The painter can also use sophisticated equipment to dry the ink from the painting for a shorter time. It is possible since only a small ink is dispensed to the artifact.
Remove the painted images from the open and place them in an enclosed place. It will not only reduce the chances of the color melting but will also give the carving enough time to dry. However, due to advancement in technology, people are using machines to apply the paint, right from the canvas, down to the sculpture and finally, drying it. You can save on time and improve efficiency by using them, which gives the image a 3D appearance.